8
No.
1
2
3
Details
Compact 4-way Cassette type
RAV-SM
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
MUT
∗∗∗∗∗
CAUTION
In case to install 1:1 Model Connection Interface, be sure to purchase also “TCB-PX30MUE”
sold separately. For installation, 1:1 Model Connection Interface board box of “TCB-PX30MUE”
is necessary.
Procedure
6 Spacer (A)
1:1 Model
Connection Interface board box
(Attached to the TCB
́
PX30MUE)
1 P.C. board
Cutting off
portion
(Shaded
area)
Screw (M4 × 14)
(Attached to the TCB-PX30MUE)
After cutting off the slit of bell
mouth on the unit, clear up the
surface of the slit that there is
no burr on the cutting edge.
Cut off a part of the bell mouth, which is enclosed with dotted
line shown in the right figure.
Using a screw (M4 × 14) of “TCB-PX30MUE” sold separately,
install 1:1 Model Connection Interface board box which was
prepared in item No.1 at the position where the bell-mouth
was cut off.
Attach spacer (A)
6
to 1:1Model Connection Interface board
box of the “TCB-PX30MUE” sold separately, and then install
P.C. board
1
.
