Central remote controller
Owner’s Manual
26
-EN
●
NOTE
• Set the clock before setting the schedule.
• If the Operating Schedule or Energy Saving Schedule is enabled,
is displayed above the clock.
• If no indoor unit is set for the zone, the schedule cannot be set.
• Schedule settings do not take effect in the following cases.
The clock is blinking (not set), the target zone is set to Void in “Operating Sch Enable/Void”, or Void is set in the “Weekly
display” screen.
• You can set the temperature in the range of 18 to 29 °C. (If the set temperature range has been changed, you can set the
temperature in that range.)
Operating Sch Enable/Void
Changing the Operating Schedule (Operating Sch Enable/Void and
Operating Sch settings)
Changing the details of the Operating Schedule settings
1
In the “Settings Menu” screen, select “Schedule settings” and
then press [
] (Confirm).
The “Schedule settings” screen is displayed.
2
Select “Operating Sch Enable/Void” using [
∧
] and [
∨
], and
then press [
] (Confirm).
The “Select Zone” screen is displayed.
3
Select the zone to change using [<], [
∧
], [
∨
], and [>], and then
press [
] (Confirm).
The “Enable/Void setting” screen of the selected zone is displayed.
• The current setting is displayed in < >.
4
Select “Enable” or “Void” using [
∧
] and [
∨
], and then press
[
] (Confirm).
The selected item is set.
• If you press [
] (Return), the “Select Zone” screen is displayed
again.
