background image

Central remote controller

Owner’s Manual

27

-EN

Operating Sch settings

1

In the “All” screen, press [

] (Menu).

The “Settings Menu” is displayed.

2

In the “Settings Menu” screen, select “Schedule settings” and 
then press [

] (Confirm).

The “Schedule settings” screen is displayed.

3

Select “Operating Sch settings” using [

] and [

], and then 

press [

] (Confirm).

The “Select Zone” screen is displayed.
• The zones for which no air conditioner is registered are not 

displayed.

Select Zone

4

Select the zone to set using [<], [

], [

], and [>], and then press 

[

] (Confirm).

The “Weekly display” screen of the selected zone is displayed.

5

Select week to change using [

] and [

], and then press [

(Confirm).

The cursor moves to the first day of the selected week.

Weekly display

6

Select the date using [<] and [>], change   (Enable), 

 (Void), 

and 

 (Special day) using [

] and [

], and then press [ ] 

(Confirm).

The cursor moves to the week of the “Weekly display”.
• If you press [

] (Return) without pressing [

] (Confirm), the setting 

is cancelled and the screen returns to the state it was in before the 
change was made.

• If you do not press [

] (Confirm) after making the change, you 

cannot switch to the “Weekly Schedule” screen.

• You can make the settings for up to 5 weeks ahead.
• By default, 

 (Enable), is set for all days.

• For information about the setting of special days, see “Changing the 

details of the special day schedule settings” (P.31).

7

Place the cursor on the Weekly display (left end) or the day of 
the week you want to set, and the press [

] (Control).

The “Weekly Schedule” screen is displayed.

Weekly Schedule

8

Select the day of week to set using [<] and [>] and the 
schedule to set using [

] and [

], and then press [

(Confirm).

The “Schedule editing” screen is displayed.
• No more than 8 schedules can be set a day.

Summary of Contents for TCB-SC640U-E




































































Reviews: