Central remote controller
Installation Manual
17
-EN
7
Temp. Increments
(1) Display the "Temperature Display Conf." screen
• Characters within "< >" indicate items currently set.
(2) Press [
˄
] and [
˅
] to select "2. Temp. Increments",
then press [
] (Confirm)
The "Temp. Increments" screen appears.
• The temperature interval of the setting temperature can
be selected from "0.5°C units" or "1°C units".
(3) Press [
˄
] and [
˅
] to select the temperature resolution,
then press [
] (Confirm)
The temperature resolution is set.
• Press [
] (Return) to return to the "Temperature
Display Conf." screen.
8
Centralized/RC Mode Conf.
(1) Display the "Centralized/RC Mode Conf." screen
(2) Press [
˄
] and [
˅
] to select "Centralized Mode" or
"Remote Control mode", then press [
] (Confirm)
The selected item is set.
• Press [
] (Return) to return to the "Servicing Menu"
screen.
●
NOTE
In the RC mode, the same lock as the remote controller is
applied and
appears.
9
DN setting
●
REQUIREMENT
Set the detailed data for the equipment.
Never change these settings because these are related to the
equipment control.
(1) Display the "List of equipment" screen
(2) Press [<] [
˄
] [
˅
] [>] to select a piece of equipment,
then press [
] (Confirm)
The "DN setting" screen appears.
• Press [
] (Return) to return to the "List of equipment"
screen.
(3) Press [
˄
] and [
˅
] to select the item Code (DN) and set
the data with [
˄
] and [
˅
]
• Press [
˄
] and [
˅
] to change the number.
(4) Press [
] (Confirm)
The data is confirmed and the "DN setting" confirmation
screen appears.
(5) Press [
˄
] and [
˅
] to select "No", then press [
]
(Confirm)
Return to the "Servicing Menu" screen.
• Select "Yes" and press [ ] (Confirm) to return to the
"DN setting" screen.
01-01
02-01
02-04
03-03
04-01
01-02
02-02
03-01
03-04
04-02
01-03
02-03
03-02
03-05
04-03
Confirm
DN setting
1F
0029
Code (DN)
DN setting
Data
DN setting
Change other data settings?
Yes
No
Summary of Contents for TCB-SC643TLE
Page 19: ...DEB5219101 ...
