Toshiba TCB-SC643TLE Installation Manual Download

Page: 10 / 19

Central remote controller

Installation Manual

-EN

Various setting methods

There are settings for "Settings Menu (P.10)" and "Servicing Menu (P.14)".

■

Setting menu items

■

How to display the setting menu screen

(1) On the "All" screen, press [

] (Menu)

The "Settings Menu" screen appears.

• Press [

] (Return) to return to the "All" screen.

(2) Press [

] and [

] to select the item, then press [

]

(Confirm)

The settings screen of the selected item appears.
Refer to "How to display each setting screen (P.10)".

• Press [

] (Return) to return to the "Settings Menu"

screen.

■

How to display each setting screen

"Zone Name Settings" screen

Operation: "1. Zone Name Settings"

→

[ ] (Confirm)

"Screen Display Settings" screen

Operation: "2. Screen Display Settings"

→

[ ] (Confirm)

"Button Settings" screen

Operation: "3. Button Settings"

→

[ ] (Confirm)

"Alarm history" screen

Operation: "4. Alarm history"

→

[ ] (Confirm)

"Admin. Password Entry" screen

Operation: "5. Admin. Password Settings"

→

[ ]

(Confirm)

Zone Name Settings

(1) The "Admin. Password Entry" screen appears

(2) Enter the password with [<] [

] [

] [>], then press [

]

(Confirm)

(3) Display the "Zone Name Settings" screen

(4) Press [<] [

] [

] [>] to select a Zone to change, then

press [

] (Confirm)

The "Select character" screen appears.

Setting items

Description

Reference

page

(1)Zone Name Settings

Screen

Display

Settings

(2)Language

Set language of screen display.

(3)Screen Contrast

Adjust the contrast (density) of the LCD.

(4)Backlight

Set the LCD backlight to ON/OFF for 15 seconds (or 30 seconds).

Button

Settings

(5)Button Sound Settings

Sets whether to make a sound or not on button operation.

(6)Button Long Press Settings

Sets whether to ON/OFF long press operation. When it is set to
activated, you can also set the long press time (1 second /
5 seconds).

(7)Sensitivity Adjustment

Adjust the sensitivity of the buttons.

Alarm

history

(8)Alarm history

Displays past 300 check code history (check code/unit/centralized
address).

(9)Service information

Display contact information.

(10)Admin. Password Settings

Sets the administrator password.

Settings Menu

Settings Menu

Zone Name Settings

Screen Display Settings

Button Settings

Alarm history

Admin. Password Settings

Admin. Password Entry

ZONE

ー

ZONE

ー

ZONE

ー

ZONE

ー

ZONE

ー

ZONE

ー

ZONE

ー

ZONE

ー

ZONE

ー

ZONE

ー

Zone Name Settings

Summary of Contents for TCB-SC643TLE




















Search results

Summary of Contents for TCB-SC643TLE

Reviews:

Related manuals for TCB-SC643TLE

Brands by name

Popular brands

Toshiba TCB-SC643TLE, Installation Manual

Search results

Summary of Contents for TCB-SC643TLE

Reviews:

Related manuals for TCB-SC643TLE

Brands by name

Popular brands