background image

53

Getting Started

Charging the main battery

Damaged power cables can cause fire or electric shock. Never 
modify, forcibly bend, place heavy objects on top of, or apply 
heat to the power cord/cable.

If the power cord/cable becomes damaged or the plug over-
heats, discontinue use. There is a risk of electric shock.

Never remove the power plug from the outlet with wet hands. 
Doing so may cause an electric shock.

Charging the main battery

Your computer came with its battery already installed. Before 
using the battery to power the computer, you must charge the 
battery.

To charge the battery, plug the computer into a live wall 
outlet. It takes several hours to charge the battery with the 
computer off. It takes much longer to charge the battery wile 
the computer is on. For more information on battery use, see 

“Running the computer on battery power” on page 112

Once the battery is charged for the first time, avoid leaving the 
computer plugged in and turned off for more than a few hours 
at a time. Continuing to charge a fully charged battery can 
damage the battery.

TECHNICAL NOTE: When your computer is using all of the 
power provided by the AC Adapter to run applications, 
features, and devices, the recharging of the battery cannot 
occur. Your computer's Power Saver utility can be used to 
select a power level setting that reduces the power required for 
system operation and will allow the battery to recharge.

Summary of Contents for Tecra A3






























































































































































































































































Reviews: