STE 73995
– 43 –
TRANSPORTATION AND INSTALLATION MANUAL
3.1.4 Connecting the Encoder Cable “ENC”
([3] of Fig. 3.1) (Cable attached)
The encoder cable is a signal line used to transmit a signal from the rotation angle
detecting encoder of each robot axis to the controller.
The connector for connecting the encoder cable is ENC ([3] of Fig. 3.1). Location of
the encoder cable on the robot side is [2] in Fig. 3.2, [2] in Fig. 3.3 or [2] in Fig. 3.4.
3.1.5 Connecting the Hand Control Signal Cable “HAND”
([4] of Fig. 3.1) (Cable: option)
The robot hand control signal cable is used for input and output of robot control signals
such as hand operation signal.
The connector for connecting the hand control signal cable is HAND ([4] of Fig. 3.1).
Location of the hand control signal cable on the robot side is [3] in Fig. 3.2, [3] in Fig.
3.3 or [3] in Fig. 3.4.
3.1.6 Grounding the Robot
An M4 screw hole for grounding purpose is provided on the basic robot base ([4] in Fig.
3.2 or [4] in Fig. 3.4).
Connect with the protective conductor of the entire facility completely.
Summary of Contents for TH180
Page 11: ...STE 73995 10 TRANSPORTATION AND INSTALLATION MANUAL Fig 1 3 Robot package TH180 ...
Page 21: ...STE 73995 20 TRANSPORTATION AND INSTALLATION MANUAL Fig 2 4 External view of TH350A T robot ...
Page 80: ...STE 73995 79 TRANSPORTATION AND INSTALLATION MANUAL APPROVED BY CHECKED BY PREPARED BY ...
