background image

33

Appendix

Using the TV’

s

Features

Setting up

your TV

Using the

Remote Control

Connecting

your TV

W
elcome to

T

oshiba

Important

Safeguards

Note:

After a power failure or disconnection of the
power, the timer settings will be lost.

Setting the clock

You must set the clock before you can program the ON timer.

To set the clock: (Example: 8:30 AM)

1. Press MENU, then press   or   to

display the SETUP menu.

2. Press 

 or 

 to highlight CLOCK

SET.

3. Press   or   to highlight the hour

position.

4. Press 

 or 

 to set the hour, then

press   to highlight the minute
position.

5. Press 

 or 

 to set the minutes,

then press EXIT to return to normal
viewing.

Setting the ON timer

This feature allows you to program the TV to turn on automatically at a
set time. If you program the ON TIMER to “DAILY,” the TV will turn on
every day at the same time to the same channel until you clear the ON
TIMER.

To set the on timer: (Example: Turning on the TV to channel 012 at
6:30 AM, DAILY)

1. Set the clock, if you have not already done so (see above).
2. Press MENU, and then press   or   to display the OPTION menu.
3. Press 

 or 

 to highlight ON TIMER.

4. Press   or   to highlight SET, then press ENTER. The ON TIMER

menu appears.

5. Press 

 or 

 to set the desired hour,

then press  .

6. Set the desired minutes and channel,

as in step 5.

7. Press   to select ONCE or DAILY.
8. Press EXIT to return to normal

viewing.

To cancel the on timer:

Select CLEAR in step 6 above.
Press EXIT to return to normal viewing.

Note:

If the power source for the TV is interrupted
(for  example, the power cord is unplugged or
a power failure occurs), you will need to reset
the clock.

Menu

Exit

SETUP

LANGUAGE

CLOCK SET

TV / CABLE

CH PROGRAM

ADD / ERASE

ENGLISH

12

:00AM

CABLE

ADD

:SELECT

:ADJUST

O N   T I M E R

O N   T I M E R

   6

: 0 0 A M

C H 0 0 3
C L E A R

: S E L E C T   : A D J U S T

E N D : E X I T

S E T U P

L A N G U A G E
 
C L O C K   S E T
T V   /   C A B L E
C H   P R O G R A M  
A D D   /   E R A S E

E N G L I S H

  8 :

3 0

A M

C A B L E

A D D

: S E L E C T

: A D J U S T

O N   T I M E R

O N   T I M E R

   

6 :

3 0

A M

C H 0 0 3
C L E A R

: S E L E C T   : A D J U S T

E N D : E X I T

O N   T I M E R

O N   T I M E R

  6 : 3 0 A M

C H 0 1 2

: A D J U S T   : A D J U S T

E N D : E X I T

O N C E

  D A I LY  

C L E A R

Using the TV’

s

Features

 3R40321A/E P27-33

9/7/04, 15:08

33

Summary of Contents for TheaterWide 30HFX84



















































Reviews:

Related manuals for TheaterWide 30HFX84