MAINTENANCE MANUAL
190
STE 85357
Fig. 4.53 Application of grease to axis 1 reduction gear (THL800, THL900, THL1000)
!
CAUTION
• Be sure to use the grease designated by Toshiba Machine.
Increase in internal pressure will adversely affect the starting torque and damage the
internal seal. To avoid this, be sure to observe the grease filling volume.
5)
Mount the axis 1 motor assembly according to "4.4.4 Mounting of axis 1 motor",
and fix the Arm 1 on the base.
6)
Mount the base front cover. (See
“Para. 4.3.2, Base Covers.”)
Amount of grease filled in Axis 1
60 g
断面図
Reduction gear proper
Protrusion of axis 1 arm
Mount the O-ring (attached to the
reduction gear) in the O-ring groove.
The thickness of the
wave generator
Apply grease
(hatched areas)
Wave generator
Axis 1 motor
Apply grease (hatched areas)
The thickness of the
wave generator