- 52 -
6 F 3 H 1 0 0 1
Table 9.11 Restoring UPS Operation (Example)
Step Procedure
LCD/LED
Status (After Execution)
1
Check the LCD screen.
Also check for other
Failure Data screens
by scrolling with scroll
keys
i
and
j
on the
panel.
2 Turn
6CH
OFF.
3
Remove the memory
card in the panel and
insert a new memory
card.*
4 Contact
the
Toshiba
Service Center.
Follow the directions given by Service Center personnel.
In the case of other failures as well, restore by doing the following:
(1) Check the nature of the failure on the LCD screen.
(2) Contact the Toshiba Service Center.
(3) Follow the directions given by Service Center personnel.
Note:
*
Before removing the memory card, always verify that the memory card write LED shown in
figure 9.10 is not lit.
BATTERIES
AC
SWITCH
UPS
BYPASS
DISCHARGE
FLOAT CHARGE
EQUAL CHARGE
~
AC INPUT
~
CONVERTER
~
INVERTER
~
AC OUTPUT
BYPASS INPUT
~
FAULT
1 52R TRIP
98-09-09 08:05:30
↓
ANOTHER ITEM