TOSHIBA
5.4
Tosvert-130 G2+ Options
5.4.1
3-Component Remote Station
This remote station includes a speed potentiometer, on/off selector switch, and
a analog frequency meter.
5.4.2
4-Component Remote Station
This remote station includes a speed potentiometer, a analog frequency meter,
and start and stop push buttons (user must supply relay logic to hold start signal).
5.4.3
Multi-Function Option Board
The Tosvert-130 G2+ Multi-Function Option Board will perform the following
ten (10) functions:
1.)
Computer interface (RS232C)
2.)
Speed feedback control (TG or PG)
3.)
Seven pre-set speeds using acceleration/deceleration time one or two.
4.)
BCD or 12 bit binary input for frequency setting
5.)
+/- 10Vdc forward/reverse frequency setting signal input
6.)
Pulse input for frequency setting
7.)
Control signal output to switch between inverter and bypass contactor
8.)
Overload detection output proportional to frequency and current
9.)
0-1 mAdc analog signal output proportional to frequency and current
10.)
Ninety six (96) times frequency pulsed output
Although the Multi-Function Option Board performs these ten (10) separate
functions, some functions cannot be used simultaneously with other functions.
Consult the Toshiba Inverter Marketing department for each individual function
to determine what options cannot be used with that corresponding function.
5.4.4
RS232C Option Board
Computer interface (RS232C) only option board
5.4.5
RS232 Cable
Cable connects option board to IBM
(TM)
compatible computer
5.4.6
RS485 Multi-Function Option Board
The Tosvert-130 G2+ RS485 Multi-Function Option Board will perform the
following five (5) functions:
1.)
Computer interface (RS485)
2.)
PG speed feedback control
3.)
Pre-set speeds with Accel/Decel 1 & 2
4.)
BCD or 12 bit binary for frequency setting
5.)
Pulse input for frequency setting
Although the RS485 Multi-Function Option Board performs these (5) separate
functions, some functions cannot be used simultaneously with other functions.
Consult the Toshiba Inverter Marketing department for each individual function
to determine what options cannot be used with that corresponding function.
5.4.7
TG/PG Option Board
Tach generator or pulse generator speed feedback control only.
5 - 5
Summary of Contents for TOSVERT-130G2+
Page 112: ...TOSHIBA 10 6 Schematics 10 17 ...
