E6581595
F-41
6
2) Switching according to terminal (switching acceleration/deceleration time by
external terminal)
(3) Acceleration at ramp of
deceleration time
(4) Acceleration at ramp of
deceleration time
(1) Acceleration at ramp of
acceleration time
(2) Acceleration at ramp of
acceleration time
Output frequency [Hz]
(4)
(1)
(2)
(3)
Second acceleration/deceleration
selection signal
Time
[s]
0
ON
OFF
Parameter configuration method
a) Method of operation from terminal input
Set run operation selection
to
(terminal block).
b) Set the second acceleration/deceleration switching to any input terminal.
The following shows an example of setting to input terminal S2.
Title Function Adjustment
range Setting
Input terminal selection 4A (S2)
0
201
24: AD2 (2nd
acceleration/deceleration)
Setting value 25 is reverse signal.
6.15.2 Acceleration/deceleration pattern setting
:Acceleration/deceleration 1 pattern
:Acceleration/deceleration 2 pattern
Function
Select a acceleration and deceleration pattern appropriate for the application.
[Parameter setting]
Title Function
Adjustment range
Default setting
Acceleration/deceleration 1 pattern
0: Linear
1: S-pattern 1
2: S-pattern 2
0
Acceleration/deceleration 2 pattern
0
