E6581595
A-8
1
1.3.3
Power circuit and control circuit terminal boards
1) Power circuit terminal board
In case of the crimp-style terminal, cover the crimp-style terminal with insulated tube, or use the crimp-
style terminal with insulation sleeve.
Refer to section 2.3.1 for details about terminal functions.
Screw size
Crimp-style terminal NOTE)
Tightening torque
M3.5
xxx – 3.5
1.0Nm 8.9lb
in
M4
xxx – 4
1.4Nm 12.4lb
in
M5
xxx – 5
3.0Nm
26.6lb
in
NOTE) xxx means wire sizes. For the wire sizes, refer to the table in section 10.1.
VFNC3-2001
2007P
* Bend the clips on the wiring port of the terminal cover to connect the PO, PA/+, and PC/- terminals.
R/L1 S/L2
T/L3
P0
PA/+ PC/- U/T1 V/T2 W/T3
Grounding terminal
(M4 screw)
Short-circuit cover
EMC plate
for installation (Note 1)
Grounding terminal
(M4 screw)
M3.5 screw
Grounding
terminal
(M5 screw)
Grounding terminal
M3.5 screw
Shorting-bar
