E6581595
K-20
11
Table of output terminal functions 2
Function
No.
Code Function
Action
Reference
40
RUN
Run/stop
ON: While operation frequency is output or DC braking is in
operation (
)
OFF: Operation stopped
3.2.1
41
RUNN
Inversion of run/stop
Inversion of RUN
56
COT
Cumulative operation time alarm
ON: Cumulative operation time is
or more
OFF: The cumulative operation time is less than
6.16.11
57
COTN
Inversion of cumulative operation time alarm
Inversion of COT
60
FR
Forward/reverse run
ON: Reverse run
OFF: Forward run
(Operation command state is output while motor operation is
stopped. No command is to OFF.)
3.2.1
61
FRN
Inversion of forward/reverse run
Inversion of FR
78
COME
RS485 communication error
ON: Communication error occurred
OFF: Communication works
6.19
79
COMEN
Inversion of RS485 communication error
Inversion of COME
92
DATA
Designated data output
ON: bit0 of FA50 is ON
OFF: bit0 of FA50 is OFF
6.19
93
DATAN
Inversion of designated data output
Inversion of DATA
128
LTA
Parts replacement alarm
ON: Any one of cooling fan, control board capacitor, or main
circuit capacitor reaches parts replacement time
OFF: Any one of cooling fan, control board capacitor, or main
circuit capacitor does not reach parts replacement time
6.16.14
129
LTAN
Inversion of parts replacement alarm
Inversion of LTA
146
FLR
Fault signal (output also at a retry waiting)
ON: While inverter is tripped or retried
OFF: While inverter is not tripped and not retried
6.12.3
147
FLRN
Inversion of fault signal (output also at a
retry waiting)
Inversion of FLR
254
AOFF
Always OFF
Always OFF
7.2.2
255
AON
Always ON
Always ON
7.2.2
Note 1: As function No. 12, 13, 18, 19, 30 to 39, 42 to 55, 58, 59, 62 to 77, 80 to 91, 94 to 127, 130 to 145 and 148 to 253
are "No function", output signal is always “OFF” at even number, output signal is always “ON” at odd number.
Note 2:Function No. are different from those on the VF-nC1. Pay attention to substitute function No. from VF-nC1 to VF-nC3.
