E6582233
G-7
7
7
7.2.2
Output terminal function (sink logic)
This function is used to output a variety of signals to external devices from the inverter.
With the logic output terminal function, you can select from multiple output terminal functions. Set two types of
functions for the OUT terminal and then you can output when either one or both of them is ON.
[Control terminal block]
OUT NO CC F
R S1 S2 P24
FLA FLB FLC
CC VI P5 FM
Usage
FLA, B, C function: Set at parameter
.
OUT function: Set at parameter
and
.
Note1) A chattering (momentary ON/OFF of contact) is generated by external factors of the vibration and the impact,
etc. In particular, please set the filter of 10ms or more, or timer for measures when connecting it directly with
input unit terminal of programmable controller. Please use the OUT terminal as much as possible when the
programmable controller is connected.
Assign one type of function to an output terminal
Terminal
symbol
Title
Function
Adjustment range
Default setting
OUT
Output terminal selection 1A
0 - 255
4 (Low-speed detection signal)
FL
(A, B, C)
Output terminal selection 2
10 (Fault signal (trip output
)
)
Note 2) When assigning 1 type of function to the OUT terminal, set only
.
Leave parameter
as the standard setting (
=
).
FLA
FLB
FLC
FL
OUT
NO
