E6582233
E-8
5
Note 1: The same characteristic can be obtained by setting the V/F control mode selection parameter
to
(automatic torque boost control) and the auto-tuning parameter
to
(auto-tuning).
Refer to section 6.16
Note 2: Setting
to
automatically programs
to
.
2) When using vector control (increasing starting torque and high-precision
operations)
is set to
(Vector c auto-tuning)
Setting torque boost setting macro function control
to
(vector c auto-tuning) provides high
starting torque bringing out the maximum in motor characteristics from the low-speed range. This suppresses
changes in motor speed caused by fluctuations in load to provide high precision operation. This is an
optimum feature for elevators and other load transporting machinery.
Note 1: The same characteristic can be obtained by setting the V/F control mode selection parameter
to
(vector control) and the auto-tuning parameter
to
(auto-tuning).
Refer to section 6.16
Note 2: Setting
to
automatically programs
to
.
3) Energy-saving operation
is set to
(Energy auto-tuning)
When torque boost setting macro function control
is set to
(energy auto-tuning), the
inverter always passes a current appropriate to the load for energy saving.
Note 1: The same characteristic can be obtained by setting the V/F control mode selection parameter
to
(automatic energy saving) and the auto-tuning parameter
to
(auto-tuning).
Note 2: When
is set to
,
is automatically set to
.
[Example of parameter setting]
Operation panel
action
LED display
Operation
Displays the operation frequency. (Perform during operation stopped.)
(When standard monitor display selection
is set to
[Operation frequency])
The first basic parameter “
” (history function) is displayed.
Turn the setting dial to the right to change the parameter to
(torque boost setting macro function).
Parameter values can be read by pressing the center of the setting
dial.
Turn the setting dial to the right to change the parameter to
(energy auto-tuning). (Right side is the setting value, left
side is the history of the previous setting.)
Press the center of the setting dial to save the changed parameter.
and the parameter are displayed alternately.
MODE
