E6582175
F-137
6
6.36 Integrating wattmeter
f748
: Integrating wattmeter retention selection
f749
: Integrating wattmeter display unit selection
Function
At the main power off, display unit of integral output power values and whether or not retain integral output
power values are selectable.
The integrating wattmeter display can be cleared by the signal to the input terminal.
Input terminal function 74, 75 (Integrating wattmeter display clear)
Title
Function
Adjustment range
Default setting
f748
Integrating wattmeter retention selection
0: Disabled
1: Enabled
0
f749
Integrating wattmeter display unit selection
Note 1)
0:1=1kWh
1:1=10kWh
2:1=100kWh
3:1=1000kWh
4:1=10000kWh
Depends on
the capacity
(Refer to
section 11.4)
Note 1) The description of the adjustment range is for the conversion of the inverter monitor display.
Refer to the RS485 Communication Function Instruction Manual E6581913, in case of using the
communication options.
6.37 Parameter registration to easy setting mode
f750
: EASY key function selection
f751
to
f782
: Easy setting mode parameter 1 to 32
Up to 32 arbitrary parameters can be registered to easy setting mode.
Refer to section 4.5 for details.
Summary of Contents for TOSVERT VF-S15 series
Page 394: ......
