E6582175
D-10
4
4.3.2
Return to default settings
typ
: Default setting
Function
It is possible to return groups of parameters to their defaults, clear run times, and record/recall set
parameters.
[Parameter setting]
Title
Function
Adjustment range
Default setting
typ
Default setting
0: -
1: 50Hz default setting
2: 60Hz default setting
3: Default setting 1 (Initialization)
4: Trip record clear
5: Cumulative operation time clear
6: Initialization of type information
7: Save user setting parameters
8: Load user setting parameters
9: Cumulative fan operation time
record clears
10, 11: -
12: Number of starting clear
13: Default setting 2 (complete
initialization)
0
● This function will be displayed as 0 during reading on the right. This previous setting is displayed on the left.
Example:
3
0
●
typ
cannot be set during the inverter operating. Always stop the inverter first and then program.
Programmed value
50 Hz default setting (
typ
=
1
)
Setting
typ
to
1
sets the following parameters for base frequency 50 Hz use.
(The setting values of other parameters are not changed.)
• Maximum frequency (
fh
)
: 50Hz
• Upper limit frequency (
ul
) : 50Hz
• Base frequency 1 (
vl
)
: 50Hz
• Base frequency 2 (
f170
) : 50Hz
• VIA input point 2 frequency (
f204
) : 50Hz
• VIB input point 2 frequency (
f213
) : 50Hz
• VIC input point 2 frequency (
f219
) : 50Hz
• Automatic light-load high-speed operation
• Upper limit of set value (
f367
)
: 50Hz
frequency (
f330
) : 50Hz
• Motor rated speed (
f417
)
: 1410 min
-1
• Communication command point 2 frequency
(
f814
) : 50Hz
Summary of Contents for TOSVERT VF-S15 series
Page 394: ......
