Operating
Instruc
tions
Presetting operation method
1. In standby mode, press the "MENU" button to select the function to be preset.
2. Press "PRESET" to enter the Preset mode, and the digital screen displays "TIMER1" and
the current preset cooking completion time. Or press the "PRESET" button again, the
digital screen displays “TIMER2” and the current preset cooking completion time.
Press “TIMER1” and “TIMER2” continuously, they will display in a cycle. “TIMER1” and
“TIMER2” have the same function. The rice cooker will store each preset cooking
completion time. The last preset cooking completion times are remembered and
recalled whenever you go back into the preset function and select “TIMER1” or
“TIMER2”.
3. Press “HR” and “MIN.” to set the time to when you want the rice cooker to finish
cooking.
The maximum preset time is 24 hours. Press the "HR." button once for 1 hour adding
and press the "MIN." button once for 10 minutes adding. Long press to increase
automatically.
4. Press the “START” button to start the preset function. The screen displays the
completion time. When the rice cooker needs to start cooking, the display will change
to display the cook time remaining. The display will then begin to countdown. The
rice cooker will finish cooking at the original completion time.
5. After cooking is completed, it will automatically change to the Keep Warm mode. The
Keep Warm time can be as long as 24 hours, and the standby state is returned back
after 24 hours. The shorter the Keep Warm time, the better the taste.
6. In the Preset setting state, the program returns to standby mode when no pressing
operation for over 2 minutes.
7. Quinoa and oat porridge meal functions cannot be preset.
8. EXAMPLE OF HOW TO USE THE DELAY FUNCTION:
You want to eat dinner at 6 PM tonight. You will press “MENU” button until you see
the type of rice you want to cook. Then you press “PRESET” button and enter the time
you want the rice cooker to finish cooking. Press “HR” button until the display shows
“18:00”. Then you press “START” button. The rice cooker will display “18:00”. The
display will change when the rice cooker needs to start cooking. The display will then
countdown and the rice cooker will finish cooking at 6 PM.
TIPS FOR GREAT RESULTS
• Measure rice and water accurately.
• For added flavor you may substitute meat stock or broth for the water and chopped
fresh herbs can be stirred into the rice at the end of cooking before allowing to rest.
• Some varieties of rice should be rinsed before cooking. Enriched rice, commonly found
in the U. S., is not rinsed to preserve the added nutrients. If rinsing rice before cooking,
measure rice before rinsing and drain as much water as possible.
• After adding the rice and water to the cooking pot, spread it evenly over the bottom.
• Do not open the lid during cooking.
• Most types of rice will be slightly undercooked at the end of the cooking program. Allow
the cooked rice to “rest” in the cooking pot for 5 to 10 minutes to absorb the last bit of
moisture.
Before using the Preset function, the current time should be set correctly
In order to avoid food deterioration, it is recommended that the preset time should not
exceed 12 hours.
DELAY COOKING
IMPORTANT
Operating
Instructions
The Delay Timer can preset two different cooking completion times, Timer1 and Timer2.
Page 15