TRST-A10/TRST-A15 POS Printer OPOS Control Application User’s Manual
TOSHIBA TEC CORPORATION EAA-02450
29
3: Transaction3
This mode automatically print a predefined back side
print data on the back side of paper.
In this mode, the print method does not immediately
starts printing. Based on a Paper Cut command or a
change in print mode, print lines processed by the print
method are printed on the front side of paper and
predefined back side data is automatically printed on
the back side.
pString
Not used (Set null (“”).)
8) Print Side Setting
Function
Switches the print side to the opposite side from the one currently selected in Transaction2
mode. When the
Station
parameter of the print method is PTR_S_RECEIPT, this function
sets the print side as specified by PTR_S_RECEIPT2.
Format
Parameter
Description
Command
TPTR_2STCMD_SET_PRINTINGSIDE
pData
Specifies the print side, front or back, by using the
Station
parameter, PTR_S_RECEIPT of the print method.
0: Front
Printing is performed on the front side of paper.
1: Back
Printing is performed on the back side of paper.
pString
Not used (Set null (“”).)
9) Upside-down Print Setting
Function
Performs upside-down printing on the front and/or back side of paper in Dual Side Print
mode.
Format
Parameter
Description
Command
TPTR_2STCMD_SET_PRINTINGSIDE
pData
0: Normal printing
1: Upside-down print only on the front side of paper
2: Upside-down print only on the back side of paper
3: Upside-down print on both sides of paper
pString
Not used (Set null (“”).)
