TRST-A10/TRST-A15 POS Printer OPOS Control Application User’s Manual
TOSHIBA TEC CORPORATION EAA-02450
30
10) Print Side Switch Setting
Function
Selects a print head for Dual Side Print. This function specifies the print head to be used
for printing on the front/back side of paper. The default setting gives a 41-mm top margin
on the back side of paper. This margin is given on the font side after the print heads are
switched.
Format
Parameter
Description
Command
TPTR_2STCMD_SWAPPRINTINGSIDE
pData
0: Default setting
1: Switch of print heads (heads for front/back side)
pString
Not used (Set null (“”).)
11) Start/End of Back Side Print Data Predefine
Function
In Transaction3 mode, specifies a start or end to predefine a data as back side data. After
“start” is specified, all data, set by the print method, is defined as back side data until “end”
is specified. Therefore, the print method does not initiate printing once the “start” is
specified.
Format
Parameter
Description
Command
TPTR_2STCMD_PREDEFINE
pData
0: Defined data clear
1: Start of definition
2: End of definition
pString
Not used (Set null (“”).)
