E6581299
- 33 -
8. Specifications
Item Specifications
Model number
USB001Z
Applicable model
Model with either an RS485 (2-wire type) connector or a common serial connector
(optional).
Usable applications: PCM001Z (V013 or successor), PCS001Z (V001 or successor)
Applicable OS
*1
Windows XP SP3
,
Windows Vista SP1, SP2
, Windows 7(32bit, 64bit)
*2
However, the personal computer
*3
must have a USB port (series A).
Use environments
Indoor operation at an altitude of 1,000m or less and free from direct sunlight,
potentially corrosive or explosive gases, steam, dust particles, dust/dirt, and
machining fluids (grinding liquid, coolant, included)
Ambient temperature
0 to +50°C
Storage temperature
-25 to +65°C
Relative humidity
20 to 93% (free from condensation and vapor)
Vibration 5.9m/s
2
(0.6G) or less (10 to 55Hz) (Compliant with
IEC 60068-2-6
)
Cooling method
Self-cooling
*1: Applicable OS in this document is subject to change without notice. Please confirm the latest applicable
OS from your distributor.
*2: Windows® is listed above as the abbreviation for a Microsoft® Windows® operating system. Microsoft®,
Windows®, Windows® Xp, Windows Vista®, and Windows® 7 are either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other countries.
*3: No warranty as to the suitability of this product for any computer and any peripheral equipment is either
made or implied.
9. Warranty
Any part of the unit that proves defective will be repaired free of charge under the following
conditions:
1. This product will be repaired free of charge, if some trouble occurs under normal
handling within one year of delivery and is caused obviously by a defect in design or
workmanship.
2. The warranty applies only to the delivered unit.
3. For the following kinds of failure or damage, the repair cost shall be borne by the
customer even within the warranty period.
1) Failure or damage caused by improper or incorrect use or handling, or unauthorized
repair or modification of the inverter
2) Failure or damage caused by the unit falling or an accident during transportation after the
purchase
3) Failure or damage caused by fire, salty water or wind, corrosive gas, earthquake, storm
or flood, lightning, abnormal voltage supply, or other natural disasters
4) Damage due to the use of the USB-serial communication conversion unit for
non-intended purposes.
4. If there are any warranty conditions otherwise provided for, those conditions will govern.
