RECORDING
35
Protecting a Recorded Cassette
RECORDING
Protecting a Recorded Cassette
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
To re-record over a protected cassette (safety tab broken), cover the
hole with adhesive tape.
66
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the
tape.
Note:
Before recording a programme, you must have preset the corresponding
station (unless you are recording via an external video source). If you
have not done so, refer to pages 16 and 17.
2
1
1
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your VTR (or the AV input if used).
Insert the cassette on which the programme is to be recorded, with the
window visible and the safety tab intact or the opening covered with
adhesive tape.
Result : The VTR is switched on automatically
Select:
♦
The station to be recorded using the CH/TRK (
i
or
j
) buttons
or
♦
The AV1, AV2 or AUX source using the I.SELECT buttons for
a satellite tuner or external video source
Result : The station number is displayed and the programme can be
seen on the television.
Select the recording speed (SP/LP) by pressing the SP/LP button as
many times as required (see page 28).
Press two REC buttons on the remote control or REC button on the front
of the VTR.
Result : The record indicator appears on the television and VTR
display. An index is recorded on the tape (see page 54).
To stop recording, press STOP (
■
) once.
2
3
4
5
6
7
SLOW
PAUSE/STILL
STOP
F F
EJECT
REC
TIMER
TV
VTR
CH/TRK
I.SELECT
CLR/ RST
F. ADV
TV VOL
2
4
5
7
8
9
0
6
REW
PLAY
CURSOR
ON/
STANDBY
INDEX
MENU /
SP/ LP
SAT.MONI.
A.DUB
SAT.CONT.
DISPLAY
TV/VIDEO
AUDIO
PROG.
ENTER
TXT/ TV
COUNT/ TR
OK
1
3
Note:
♦
If the cassette is ejected when you start
recording, check that the safety tab is intact or
the opening is covered with adhesive tape.
♦
If you reach the end of the tape while recording,
the cassette rewinds automatically.
RECORDING
NexTViewLink Function of this
VTR
continued
66
TV Picture Record Setting
Before contacting the Toshiba after sales service, perform the following simple checks.
RECORDING
34
Picture
The VTR records:
During recording, if you change
the channel or the input mode on
the TV, the recording will be :
Channel selected on the TV
VTR channel of the same
Ext. TV channel 1
If you performed “TV CH
number as the TV
DOWNLOAD” (TV stations
stored on the VTR and the TV
Continued.
in the same position order).
If you did not perform “TV CH
AV1 (output of the TV)
DOWNLOAD” (TV station not
stored on the VTR and the TV
Stopped.
in the same position order).
Pictures of external equipment
AV1 (output of the TV)
connected to the TV.
Stopped.
Channel selected on the VTR.
VTR channel
Ex. VTR channel 1
Continued
Recording a Programme Immediately
