18
How to operate your vacuum cleaner
Schematic diagram
Fuse
Power switch
Self-resetting
thermal cut-out
Motor
Power cord
Warning
●
Do not use the vacuum cleaner without proper installation of the dust
cup and filter.
How to clean floor and carpet
Clean carpet
●
Move floor head lightly along the carpet.
Clean floor
●
To increase the cleaning effect and avoid
scratching the floor surface, move floor head
lightly along the floor.
1
Check if the dust cup and filter are installed.
2
Pull out the cord straight and insert the plug to the socket outlet.
3
Assemble the hose, telescopic wand and other accessories.
4
Press the power switch to operate the appliance to clean.
5
Turn off the power switch and unplug the appliance after cleaning.
6
Hold the plug and press the cord rewind button to wind up the cord slowly.
Caution
●
Disconnect all the electrical supply and remove the plug if electricity
supply is cut off while using the appliance.
141114c1_VC-GC32BSA.indb 18
2014/11/14 16:11:43