1 4
Auto Set Up
1
Connect the antenna cable to the VCR (see page 11). Then connect the VCR’s power
plug to an AC outlet.
“Auto” flashes in the VCR display as the VCR automatically tunes in all active stations.
When Auto Set Up is completed successfully, the current time will be displayed.
• If the VCR fails to set the clock, “– : – –” will be displayed. Set the clock manually. (Refer
to “Setting the clock” on page 16.)
PREPARATION
Auto Set Up
The Auto Set Up function automatically sets the tuner channels and clock when power is first connected
to the VCR.
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press
I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.
• Press
VCR
to set the remote control operating the VCR.
Tuning in progress.
Auto Set Up completed.
VCR display
Notes
• If you press the
CANCEL button, the Auto Set Up is cancelled.
• If Auto Set Up is not perform successfully, perform the clock and Tuner Channel procedures manually
(page 16 to 18).
• If, however, you want to add or delete channels, refer to “Adding or erasing channels” on page 18.
VCR display
PM
