5-4. Inductor Indication
Unit
None
• • • H
µ
• • •
µ
H
m
• • • mH
Tolerance
None
• • • ± 5 %
B
• • • ± 0.1 %
C
• • • ± 0.25 %
D
• • • ± 0.5 %
F
• • • ± 1 %
G
• • • ± 2 %
K
• • • ± 10 %
M
• • • ± 20 %
Type
PL
• • • Peaking
For others, model name is described.
Table 5-4-1
5-5. Waveform and Voltage Measurement
* Measurement of waveform and voltage at each section in the color circuits was conducted with sufficient service color
bar signal being received and reproduced in normal conditions.
* Waveforms and voltage values for the remaining circuit were measured with a broadcasting signal normally received,
so they may vary slightly according to the programs being received. Use them as a measure for servicing.
* All voltage values except the waveforms are expressed in DC and measured by a digital voltmeter.
Fig. 5-4-1
10µ
Type
Tolerance
