31
RECORDING
Auto Speed Select
If you are not sure the tape is long enough for
timer program recording in the SP tape speed,
set the recording tape speed to “AUTO”.
Recording starts in the SP tape speed and the
VCR automatically selects the tape speed to
record the program to the end. If the tape length
is not long enough, the tape speed automatically
changes from SP to SLP.
PROG
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
25 8 / 30
: 30
– : ––
SLP
E D:
n
O
n
CH DATE
OFF
D
P
S
PM
PROGRAM
SET UP
PRESET
9
PROG
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
25 8 / 30 9 : 30
: 00
E D:
n
O
n
CH DATE
OFF
D
P
S
PM
PMSLP
PROGRAM
SET UP
PRESET
10
PROG
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
25 8 / 30 9 : 30
10 : 00
E D:
n
O
n
CH DATE
OFF
D
P
S
PM
PMSP
PROGRAM
SET UP
PRESET
Notes
• Make sure that the tape length is selected correctly
according to the tape used on the SET UP screen
(page 25).
• When the SLP tape speed is selected and the tape
length is not sufficient to record the program to the
end, the program cannot be recorded to the end.
• The picture will be distorted when playing the part
where the recording tape speed is switched from SP to
SLP with the Auto Speed Select feature.
PROG
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
– – – / – – – : – –
– : – –
–
25 8 / 30 – : – –
– : – –
SLP
E D:
n
O
n
CH DATE
OFF
D
P
S
PROGRAM
SET UP
PRESET
→
8/25
→
8/26
→
…
→
9/24
→
WKLYSU
→
…
MO~FR
←
WKLYSA
←
5
Move to the next using
FF
, and set
the recording date using
PLAY/x2
or
STOP
.
The date changes as follows:
[WKLYSU]…[WKLYSA]:
You can record TV programs on the same
channel on the day and time every week.
[MO~FR]:
You can record TV programs on the same channel on the
day and time Monday through Friday.
6
Move to the next using
FF
, and set
the hour and minutes of the
recording start time.
7
Move to the next, and set the
recording off time.
8
Move to the next, and select the tape
speed (SP) using
PLAY/x2
or
STOP
.
For the tape speed “AUTO (Auto Speed
Select)”, see below.
To set another program, press
FF
, and
select the next line pressing
STOP
.
Repeat steps 4 to 8.
9
Press
PROG.
.
Now programming is completed.
10
Press both
TIMER
simultaneously.
The power turns off and the VCR enters
the timer standby mode.
TIMER
POWER
(Continued)
REC
TIMER
