27
RECORDING
Confirming the timer programs
Press PROG. during timer recording mode.
The screen for confirming will appear.
Press PROG.again to exit from confirmation
page.
Changing/cancelling the timer
programs
1) If the TIMER indicator is lit, press both
TIMER to turn it off, and then turn the VCR
on by pressing VCR POWER.
2) With steps
2
to
9
, change the items.
To cancel a program, select the program you
want to cancel in step
4
, and press CANCEL.
The line is then cleared.
3) Press both TIMER to return to the timer
standby mode.
Error indication
The “--E-” ( Error ) indicator appears in the VCR
display if you press both TIMER when:
–– a cassette is not loaded.
–– the loaded cassette has no safety tab.
–– timer recording is in progress.
In these cases, a recording can not be made.
To cancel the Timer Recording
By pressing the POWER button on the front
panel of the VCR, it will cancel the timer
recording and go to standby.
Program 1
(Start time)
Overlapped portion
(not recorded)
Program 2
(Start time)
Overlaps of the programs
If two timer programs overlap, the recording
start time of program 1 has priority over the
recording off time of program 2.
P
M
P
M
If a power failure occurs during
the timer program recording
• When a power failure has occurred, the
programmed contents are not affected,
reset the clock.
W522CG ENG new(24-29)
2/20/04, 11:19
27
