https://www.toshiba.com/tic/
35
Program Menu Navigation
W7B ASD Installation & Operation Manual
Program Menu Navigation
The tables below list the menu items of the Program
mode and maps the flow of the menu selections.
The Parameter Numbers for the listed functions are
provided where applicable. The functions listed may
be viewed, or selected and changed as mapped
below or via the Direct Access method: Program
Direct Access
Applicable Parameter Number.
PRIMARY MENU: FUNDAMENTALS
Frequency Settings
Standard Mode Selection
ACC/DEC 1 Settings
(
)
Maximum Frequency
(
) Upper Limit Frequency
(
) Lower Limit Frequency
(
) V/f Pattern
) Command Mode
Selection
) Frequency Mode 1
) Frequency Mode 2
) Frequency Priority
Selection
) Frequency Mode Priority
Switching Frequency
) Acceleration Time 1
) Deceleration Time 1
) S-Curve Acceleration/
Deceleration Pattern 1
) Automatic Acceleration/
Deceleration Selection
Motor Set 1
(
) Base Frequency 1
(
) Base Frequency Voltage
1
(
) Manual Torque Boost 1
(
) Motor Overload
Protection Level 1
PRIMARY MENU: STARTUP WIZARD
(N/A) Select Language
(N/A) Select Voltage and
Frequency Rating
of the Motor
(
) Upper Limit Frequency
(
) Lower Limit Frequency
(
) Automatic Acceleration /
Deceleration Selection
(
) Acceleration Time
(
) Deceleration Time
(
) V/f Pattern
(
) Command Mode
Selection
(
) Frequency Mode 1
(
) Current/Voltage Units
Setup
PRIMARY MENU: CHANGED FROM DEFAULT
See the section titled
Default Setting Changes on pg. 30.
PRIMARY MENU: DIRECT ACCESS
See the section titled
Summary of Contents for W7 DN-57442-006
