![background image](http://html.mh-extra.com/html/toshiba/wipt2000/wipt2000_quick-reference-manual_427256015.webp)
Draft - Wireless IPT Quick Reference Guide 10/04
12
Hold
1. To place a call on Hold, press the
Hold
button.
2. To return to the held call, press
FBA
and the held line’s
button.
If you do not return to the held call, it rings back to your
phone. If you are busy on another call, you hear two tone
bursts. If the held party hangs up, the call is released.
3. If you have additional lines at your station to hold, repeat
Step 1 above.
³
To place a call on Exclusive Hold
³
While on a call, press
Hold
twice. (No one can accidently pick up
your call.)
³
To place a call on Automatic Hold
³
While on a call, press another extension button to receive/originate a
new call. You can switch between calls without having to press
Hold
.
Is this statement true???
Make sure this feature is programmed on your system; if not,
existing calls will drop.
³
To place a call on Consultation Hold
If you have multiple extensions on your phone, you can hold
a different call on each extension.
³
Press
Cnf/Trn
.
CIX-QR-WIPT2000.book Page 12 Tuesday, September 14, 2004 5:20 PM