User’s Manual
6
Getting Started & Grand Tour
(Sample Illustration) The AC adaptor (3-pin plug)
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.
■
Depending on the model, either a 2-pin or 3-pin adaptor/power lead will
be bundled with the device.
■
Do not use a 3-pin to 2-pin conversion plug.
■
The supplied power cord conforms to safety rules and regulations in
the region the device is bought and should not be used outside of this
region. In order to use the adaptor/device in other regions, you should
please buy a power cord that conforms to the safety rules and
regulations in that particular region.
■
Always use the TOSHIBA AC adaptor that was included with your
device, or use AC adaptors specified by TOSHIBA to avoid any risk of
fire or other damage to the device. Use of an incompatible AC adaptor
could cause fire or damage to the device possibly resulting in serious
injury. TOSHIBA assumes no liability for any damage caused by use of
an incompatible adaptor.
■
Never plug the AC adaptor into a power source that does not
correspond to both the voltage and the frequency specified on the
regulatory label of the unit. Failure to do so could result in a fire or
electric shock, possibly resulting in serious injury.
■
Always use or purchase power cables that comply with the legal
voltage and frequency specifications and requirements in the country of
use. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.
■
The supplied power cord conforms to safety rules and regulations in
the region the device is bought and should not be used outside this
region. For use in other regions, please buy power cords that conform
to safety rules and regulations in the particular region.
■
Do not use a 3-pin to 2-pin conversion plug.
