When connecting an AC Adaptor to the Port Replicator, use only the
AC Adaptor included with Port Replicator. Do not use the computer’s
AC Adaptor.
Refer to the Port Replicator’s User's Manual for more details.
To dock your computer in the Port Replicator, do the following:
1.
Align the top left and top right corner of your computer to the correct
mark on the Port Replicator.
Short Name
Top Left Corner
Top Right Corner
Z30-B
A
AB
Z40-B
B
AB
2.
Press down on the back of the computer until it clicks into place. The
computer connector on the port replicator engages the computer’s
docking port.
When the computer is connected, the Docked light on the Port
Replicator glows green while the computer is powered on.
Figure 4-13 Aligning your computer with the Port Replicator (Z30-B)
1
1. Docking port (computer)
Product appearance depends on the model you purchased.
Make sure the AC adaptor is always connected to the TOSHIBA Hi-Speed
Port Replicator III 180W/120W while in use. Otherwise the Port Replicator
will stop working, possibly resulting in data loss.
Some models support multiple display function if equipped with a TOSHIBA
Hi-Speed Port Replicator III 180W/120W.
User's Manual
4-29
