background image

Radio approvals for wireless devices

This equipment is approved to the radio standard by the countries/regions
in the following table.

If you use this equipment in the countries/regions which are not listed in the
following table, contact TOSHIBA Support.

As of December 2014

Austria

Belgium

Bulgaria

Canada

Cyprus

Czech Rep

Denmark

Estonia

Finland

France

Germany

Greece

Hong Kong

Hungary

Iceland

India

Ireland

Italy

Japan

Korea

Latvia

Liechtenstein

Lithuania

Luxemburg

Malta

Monaco

Netherlands

Norway

Philippines

Poland

Portugal

Romania

Slovak Republic

Slovenia

Spain

Sweden

Switzerland

UK

USA

 

Information about Intel AMT

Your computer might support Intel

®

 Active Management Technology (AMT)

depending on the model you purchased.
Using built-in platform capabilities and popular third-party management and
security applications, Intel AMT allows IT to better discover, heal, and
protect their networked computing assets.
Consult with your system administrator about configurations of the AMT
function before connecting to a network.

Disable the AMT function

Intel AMT function is enabled by default, and in a situation where no
system administrator presents, it is strongly recommended that you turn off
the AMT function before connecting to a network.

If the AMT function is NOT turned off, there is a danger that the
management of AMT function will be abused by other parties which
possibly lead to the leak of sensitive and/or proprietary information,
data loss, HDD/SSD erasure, or file overwritten.

First, you must do the following in the BIOS setup utility:
1.

Turn on the computer while pressing the 

F2

 key.

User's Manual

7-14

Summary of Contents for Z30






















































































































































Reviews: