background image

Caution

*   This manual contains cautions and instructions for safe use of the product. 

Please read it carefully before using to ensure appropriate use.

This document illustrates the dangers of using this product without taking necessary 

precautions. Please refer to the symbols below for different types of safety points.

This document illustrates safety points to be followed using the symbols below.

Illustrates specific actions which are prohibited.

Illustrates specific guidelines which must be followed.

Caution

Precautions upon installing the product (Please read before installation.)

Check the foundation base and strength of the material before installing this product. 

If not installed properly to the foundation base, there are dangers of it falling.
Install this product as instructed with the necessary quantity of brackets. Otherwise 

the product may fall.

Warning

Warning

Caution

Illustrates that if this product is misused, there are dangers of 

serious injuries or possible fatal accidents.

Illustrates that if this product is misused, there are dangers of 

casualties or possible physical damage of the product.

P. 2

This product is intended for indoor use. Please do not use it for outdoor 

purposes.

Locations subject to high temperatures and high humidity, or areas 

where water may leak, should be avoided.
Make sure to install this product horizontally.
Do not grab the set bar to carry or lift this product. It may cause damage 

to the product.

When there is a strong wind, either 

close the window or have the Screen 

completely rolled up.

Please do not dismantle the mechanical 

assembly nor lubricate the moving parts 

of this product. This will ensure physical 

damage or malfunction of the product.
Please do not use it by 

open flames.

Safety in Use (Please read thoroughly.)

Please do not hang from or pull on 

this product. This may damage the 

product or cause it to fall down.

Please do not operate the product 

abruptly or with unreasonable force. 

This may cause the product to fall down 

or break.

Please do not let children play with the cord or chain.
Please do not wrap the cord or chain around you, or allow it to get caught on 

something, because this may result in an accident.
When not operating the product, tie the cord and chain at a height that is out of 

reach of small children.

P. 3

Warning

Caution

Be sure to grasp the pull cord or the ball chain to operate 

the blind. Do not operate it by grasping the screen, roller 

pipe or weight bar.
Do not place an object that is liable to break or an object 

that is likely to interfere with the operation of the product, 

inside the range of the opening and closing operation.
Use the product within the specified height range. If you 

use it outside this range, the screen may fall down or break.

Summary of Contents for Mytec 01 Loop Double Type











Reviews: