P. 1 2
How to Adjust the Screen Operation Force and the Ascent Speed
<Mytec 01 Loop>
■
Lighter roll up
<Right operation>
●
Turn Winder 1-2 times clockwise while pulling
Winder as directed and unlocking the speed.
<Left operation>
●
Turn Winder 1-2 times counter- clockwise while
pulling Winder as directed and unlocking the
speed.
<Left operaion>
●
Turn Winder 1-2 times clockwise while pulling
Winder as directed and unlocking the speed.
■
Heavier roll up
<Right operation>
●
Turn Winder 1-2 times counter- clockwise while
pulling Winder as directed and unlocking the
speed.
(1)Remove the screen.
* Refer to P.7 (5) How to remove the screen.
(2)Align Winder provided with the black knob on
the screen that you removed, then carry out
adjustment as described below.
Winder
Black knob
While pulling
Turn
counter- clockwise
While pulling
Turn
clockwise
While pulling
Turn
clockwise
While pulling
Turn
counter- clockwise
Winder does not turn if not pulled to unlock direction as illustrated.
Do not turn more than twice at once.
Caution
Hold Winder securely especially while pulling to unlock direction. If Winder is released
while pulled to unlock direction, Roller Pipe blows off Winder, and it may cause accidents
or injuries.
P. 1 3
<Mytec 01>
■
Faster roll up
●
Turn Winder 1-2 times clockwise while
pulling Winder as directed and unlocking
the speed.
■
Slower roll up
●
While pulling Winder as directed and
unlocking the speed, turn Winder half a
turn in the clockwise direction and then
1-2 times in the opposite direction.
While pulling
Turn clockwise
Winder does not turn if not pulled to unlock direction as illustrated.
Do not turn more than twice at once.
Caution
(3)To install the screen, follow the procedure set out on P.7 (3).
Hold Winder securely especially while pulling to unlock direction. If Winder is released
while pulled to unlock direction, Roller Pipe blows off Winder, and it may cause accidents
or injuries.
While pulling
Turn counter- clockwise
While pulling
Turn clockwise
half a turn
