Attach the Pilot Roller to the Belt
Joint.
Insert the Pilot Roller from the
left-hand side of the Track.
For Two way-draw, attach the Pilot
Runner set to the preset Belt Joint
and insert into the track.
Insert the left side of the Track into
the End side Pulley.
Place the right end of the Drive Belt
through the Motor side Pulley.
(This can be done by pushing the
tip of the Drive Belt into the Pulley.)
Attach the Belt Joint and Belt Joint
Cover to the right end of the Drive
Belt.
Attach the Belt Joint so that the Belt
protrudes from the Belt Joint by the
height of one drive tooth. Attach the
Belt Joint and Joint Cover until they
click into position.
Attach the Pilot Roller to the Belt
Joint.
Insert the Pilot Roller
from the
right-hand side of the Track.
Place the Pilot Rollers end to end.
Use the Joint Plate to join the Pilot
Rollers.
Joint Plate
Belt Joint
Belt Joint
Pilot Roller
Pilot Roller Set
④
⑤
⑥
⑦
⑧
⑩
⑪
⑫
⑬
⑨
M side Pulley
Belt Joint
Belt Joint cover
One drive tooth
Belt Joint
Pilot Roller
