Cleaning
Cover
Cover
`<Fixing screen folds that have become disorganized>
Rear
Pitch-Keeper Cord
Lift Cord
P. 10
P. 11
Troubleshooting
Example
Condition
Cause
Solution
The Lift Cord may be
twisted.
The screen won’t lower.
(Cord type)
Untwist using the following
procedure.
The pleat folds may be
disorganized.
The screen won't stack
neatly.
See "Fixing screen folds that
have become disorganized"
on P.10 and P.11.
The pitch-keeper cord
Bush securing position
may be off.
The screen raises
diagonally.
See "Fixing screens that
raise diagonally" on P.11.
<Removing twists from the Lift Cord>
Remove each twist from the Lift Cord and
slide in the cover from the bottom.
Slide a screwdriver under the cover to
remove it.
If the screen is disorganized, adjust the pleats
and raise into the stacked position.
Leave the screen in the stacked position
for a while, and operate again once the
pleat folds are corrected.
∗
The length of time required for correction
varies depending on the screen type and
condition. If the screen disorganization is
not corrected on the first attempt, leave the
screen in the stacked position described in
2
above for as long as possible.
The pitch-keeper cord Bush secured on
the back of the Head Rail should be
aligned directly above the Lift Cord.
`<Fixing screens that raise diagonally>
Pitch-Keeper cord
Bush
Head Rail
For regular care, dust with a feather duster or a hand mop.
Refrain from wiping with water or the screen coming into contact with water as it may cause the
colors to change.
The screen has a special resin finish that may leave wrinkles or deformations if bent or folded. It
may be impossible to return the screen to its original shape.
