Radio
3
Radio
4
Radio
1
Radio
2
TV
3
TV
4
TV
1
TV
2
TV
3
TV
4
TV
1
TV
2
THANK YOU
Thank you for purchasing the TOTAL CONTROL Signal Amplifier. TOTAL CONTROL
continuously strives to develop, produce and market high-quality innovative products to
meet your needs. We hope this Signal Amplifier will give you total satisfaction.
THE PRODUCT
The TOTAL CONTROL Signal Amplifier is designed to boost the signal of your aerial or cable
box, this allows you to distribute the signal to multiple devices and/or use longer cables
without losing picture and sound quality.
Below you’ll find the description of your TOTAL CONTROL Signal Amplifier (see picture 1).
A.
Power adapter (power plug)
B.
Power adapter input
C.
Signal input
D.
Signal outputs
E.
LED indicator (ON / OFF)
F.
Holes for wall mounting
CONNECTING THE SIGNAL AMPLIFIER
To connect your TOTAL CONTROL Signal Amplifier, please follow the steps below:
•
Connect your TV(s) or other devices to the signal outputs (D 1-4)
•
Connect your aerial / cable TV coaxial cable or other device (see picture 2) to the input
(C) on the TOTAL CONTROL Signal Amplifier.
•
Plug the power adapter to the input (B) on the TOTAL CONTROL Signal Amplifier.
•
Plug the power adapter into the mains (A).
•
Check if the LED indicator illuminates (E).
Wall mount installation
•
You can use the holes at the back of the TOTAL CONTROL Signal Amplifier for wall
mount installation (F).
Examples of different situations (pictures 2 – 5):
An aerial coaxial cable (Freeview) or coaxial cable for your cable TV (DVB-C / DVB-C2) is
connected to the input (IN) of the TOTAL CONTROL Signal Amplifier. The signal will be
boosted and distributed to up to 4 TVs or other devices.
The coaxial output of a TV receiver (Freeview / DVB-C / DVB-C2) is connected to the
input (IN) of the TOTAL CONTROL Signal Amplifier. The signal will be boosted and
distributed to (up to) 4 TVs or other devices.
An aerial coaxial cable (Freeview) or coaxial cable for your cable TV (DVB-C / DVB-C2) is
connected to the coaxial input of a TV receiver, which is connected to the HDD / DVD
recorder. The coaxial output of the HDD / DVD recorder is connected with the input (IN)
of the TOTAL CONTROL Signal Amplifier. The signal will be boosted and distributed to
(up to) 4 TVs or other devices.
The FM aerial is connected to the input (IN) of the TOTAL CONTROL Signal Amplifier
which will boost the signal and distribute it to (up to) 4 radio tuners.
(*)
It may be possible that you have to use inline coax-connectors to make the connections.
(See picture).
HELPFUL HINTS
If the picture or sound quality is unsatisfying, please follow the helpful hints below:
•
If the incoming signal is unclear, the TOTAL CONTROL Signal Amplifier will not improve
your picture as it will also amplify the noise in the signal. Please contact your aerial /
cable TV installer for further details.
•
Check all the connections. Loose or bad connections will result in an unclear picture.
*
2
HDD / DVD
recorder
STB
STB
5
4
3
D
1
D
2
D
3
D
4
E
F
F
1
TV
3
TV
4
TV
1
TV
2
A
1
2
3
4
5
C
B
SV_1304_Opmaak 1 15-04-16 11:26 Pagina 2
