10
ELEVATE
®
PULL-UP
TM
OWNER’S GUIDE
MAINTENANCE
MAINTENANCE AND CARE
Your ELEVATE Pull-Up unit will offer you
years of easy operation if you follow these
simple tips for maintenance and care.
With periodic cleaning, moving parts and
rolling surfaces will maintain their smooth
function. Clean rail surfaces on a regular
basis with a noncorrosive cleaner like
soap and water or waterless cleaner or
just wipe clean with a dry towel. Some
black powder residue is normal on the
inside of the rails. All other parts can be
cleaned the same way or antibacterial
wipes may be used.
CAUTION!
DO NOT USE ANY LUBRICANTS
OR SILICONE-BASED PRODUCTS on
the rails or wheels. This will cause the
wheels to slide rather than roll and will
damage the wheels. Use a non oil–based
window cleaner on the glideboard
material. DO NOT USE ARMOR ALL
®
OR
LIKE SUBSTANCES. These will make
the glideboard slippery. Wipe down your
ELEVATE Pull-Up with a clean cloth.
MAINTENANCE SCHEDULE
WEEKLY
1. Wipe down rails with a non-corrosive,
no alkaline, no alcohol cleanser.
2. Clean all surface areas for aesthetics.
3. Check all screws. Fasten to ensure
they are installed correctly and
tightened.
4. Check all pads for wear and replace as
needed.
MONTHLY
1. Visually inspect the rollers. Clean any
debris accumulated on the roller.
2. Inspect rubber stoppers.
3. Replace all parts that show signs
of wear. Contact Customer Service
in USA at 858-586-6080 or email
support@totalgym.com. For
international customers, contact the
approved distributor in your country.
DAILY
1. Wipe down all padded surfaces with
antibacterial cleanser after each use.
2. Move the glideboard up and down
rails to ensure smooth rolling. If the
glideboard does not roll smoothly,
clean rails and wheels thoroughly with
a soft lint-free cloth.
