4
ASSEMBLY INSTRUCTIONS
STEP 1.
Remove the PlyoRebounder and
the clamp from its packaging and check
that all the pieces shown below are pres-
ent. Set the clamp and parts on the floor
by the wheels, as shown below.
STEP 2.
To unfold the PlyoRebounder
stand at either side of the frame next to
the weight bar post. Lift the ring with one
hand and hold it.
CAUTION:
the ring is
heavy and may fall. It is a good idea to
have someone to hold the ring, while you
do the next step.
CAUTION:
Keep yourself and others
outside of the PlyoRebounder frame to
ensure safety.
STEP 3.
Lift the handle column until it
is vertical. Then lower the ring as shown
below.
SPECIFICATIONS
AND LIMITATIONS
WEIGhT AND ADjUSTMENT SPECS
• Max User Weight: 220 lbs | 100 kg
bodyweight for light jumping or jogging
• Eleven positions, 5° apart —from flat to
50° tilt
• Rolls for easy transport
• Anchor posts allow 90 lb of Olympic
weight* on each side
*not included
• 4 holes to bolt to floor
SIzE SPECIFICATIONS
• Mat Diameter: 27”; 69 cm
• Maximum size (in use):
40” W x 48” L x 43” H,
102 cm W x 122 cm L x 109 cm H
• Shipping size (boxed):
42.5” W x 47.25” L x 10.5” H;
108 cm W x 120 cm L x 27 cm H
• Net Weight: 75 lbs; 34 kg
• Gross Shipping Weight:
95 lbs; 43 kg
ASSEMBL
Y
OWNER’S GUIDE |
TOTAL GYM PLYOREBOUNDER
®
