Figure 39
: Web Application - Individual Pro
fi
le - Insertion
Loss Field
To add a new frequency and dB loss pair, simply enter the data into the blank
fi
elds at
the bottom of the table and click the
+
button. The new data pair will be added as a new
row in the table at the appropriate location. Valid frequency values are between 0 MHz
and 100,000 MHz and valid dB loss values are between 0 dB and -100 dB. If the data is
invalid, the entry
fi
elds will be highlighted in red. If the data is invalid or missing, clicking
the
+
button will not add a new row.
To edit an existing frequency and dB loss pair, either click on the data
fi
eld or the
Pencil
icon. The text will change to editable
fi
elds. It is only possible to edit a single row at a
time. When editing a row, all other row icons will become disabled. The same frequency
and dB loss data validity rules apply to editing existing pairs. Click on the
Green Check
icon to accept the new data or on the
Red Cancel
icon to cancel the edit. After the data
is changed, the row may be resorted if needed.
To remove an existing frequency and dB loss pair, click on the
Red X
icon to delete that
row.
Duplicate frequency and dB loss pairs are not allowed. If a added pair or edited pair
results in a duplicated data pair, a warning message will appear and no new row will be
added to the table.
Saving or Cancelling Changes
To save the changes made in the pro
fi
le, click on the
Save
button. If any
fi
eld fails client-
side validation, the form will scroll to that
fi
eld to be corrected.
Advanced Cable Tester v2 User Manual v2.0.0
57
