STEP • 2
STEP • 3
03
IMPORTANT
All Sheds With 4 or
More Floor Pannels
have the smallest Floor
Panel on the Ends.
As shown on this diagram.
2a.
Place the 6ft long Floor Block
Ends provided on both ends of the
floor alongside existing floor bearers
as shown below.
2b.
Fix together by screwing the
Floor. Blocks at each end as shown.
Use the screws provided and make
sure the ends are fixed securely. 3
screws on each end will suffice.
FLOOR & BLOCK ENDS
Add the Floor Block Ends
(Heavy Duty Posts)
= Drill Points using
screws provided as shown
= Drill Points using
screws provided as shown
x2
4.0 x 70mm
Per Floor Section
x3
x3
4.0 x 70mm
Per Floor Block
FL
OOR BL
OCKS
FLOOR PANELS
2ft BLANK
2b
2b
2a
2FT RIGHT PANEL
2ft RIGHT PANEL
Place first panel againts
far right of shed floor
as shown.
(2ft wide blank panel)
3a.
Place the 2t panel against the far right side of the shed floor. Make sure the panel stands
firmly on the Heavy Duty Post (Floor Block)
3b.
Now prepare the 4ft Blank Panel in order to create an ‘L’ shape in the corner with the two
panels.
3c.
DO NOT fix the panels at this stage to the floor. This is because you need
to leave room for adjustements in the final stages of the shed build.
Next step will be to add the other 4ft section
on the back to create an ‘L’ shape.
© Sheds (Midlands) Limited 2021
www.totalsheds.co.uk
