14/20
3. Lift the vehicle with the appropriate jack.
4. Once at the correct height, carefully position the support
stands under the vehicle in the designated places. Place the
support stands on each side of the jack.
The support stands should be spaced as far apart as
possible!
If you place the support stands too close together,
the vehicle has a greater chance of falling over.
5. Make sure that the load is centred on the stand’s saddle.
6. Raise the saddle to the desired height. The saddle will click
automatically when you lift the post. Make sure the saddle is
placed as close to the vehicle as possible.
7. Slowly lower the vehicle on the support stands.
