10/28
3.
SAFETY INSTRUCTIONS
3.1.
Explanation of the safety decals
If the decals are damaged or missing, please replace them.
1
3
5
2
4
6
N° Explanation
Reference
1 The wheels must be locked
before using the jack
162TA8911
2 To lift the jack, press the lever
up and down quickly
3 The jack shall be placed in its
intended position under the
vehicle
4 To lower the jack, turn the lever
counter-clockwise
5 The vehicle must stand on a
flat, stable surface
6 Fill until oil is approx 6.5 mm
below the filler hole level
3.2. General safety instructions
• Inspect before every use. Examine the forklift jack for cracks or damage before
each use. Do not use if even a minor crack, bend or other damage/deformation is
found. Discard the forklift jack if damaged or deformed.
• The person responsible for the use of the product must make sure that all of the
safety rules in force in the country of its use are applied, to guarantee that the
equipment is used in conformity with the use for which it is destined and to avoid
any dangerous situation for the user.
• Do not operate the product unless you are of age.
• TVH Parts Holding NV cannot anticipate each possible circumstance that may
result in danger. Therefore the warnings given in this publication and which appear
on the equipment are not exhaustive.
In the event that equipment, procedures, work methods or working techniques are
used that are not specifically advised by the company TVH Parts Holding NV, it is
necessary to make sure that there is no danger to the operator or other people.
• Study, understand and follow all instructions before operating this equipment.
• Do not exceed the rated capacity, be aware of dynamic loading.
• The garage jack may only be used for vertical lifting operations on a horizontal, flat
and load-bearing surface in well-lit areas.
• The garage jack is only intended for lifting and not for supporting the vehicle.
Therefore always use correctly installed and dimensioned, approved supporting
stands under the vehicle, immediately after the jack has lifted the vehicle, and
before starting to work on the vehicle. Always support the lift truck by means of a
pair of support stands.
• Never crawl under the vehicle until the support stands are correctly positioned, as
this could result in injury or death.
