13/24
Adjustment of lifting position:
1. Place the operating lever in the lifting position.
2. Pump the tiller handle; the linkage is not operated, the forks raise and tilt while the
discharge valve remains completely closed.
3. If the forks do not lift or tilt, regulate the adjusting nut and screw until a normal lifting
and tilting action is attained.
Adjustment of lowering position:
1. Pull the operating lever in the lowering position.
2. The linkage is operated, causing the discharge and pressure valve to open completely,
and the forks to lower.
3. If the forks don’t lower, regulate the adjusting nut and screw until a normal lowering
action is attained.
7. MAINTENANCE
7.1.
Safety instructions for repairs of the pallet truck
• No modifications or alterations which could affect capacity, stability or safety
requirements of the pallet truck, but not limited to these examples, shall be made
without the prior written approval of the original manufacturer, its authorised
representative, or a successor thereof.
• Make sure that the truck is in a secured and stable position, ensuring that it will not
suddenly move.
• Wear safety gloves and safety shoes.
7.2.
Maintenance schedule
Task
D
W
M
6M
1. Cleaning
2. Daily maintenance check
3. Lubrication
4. Check oil level
5. Check chain
D: daily, W: weekly, M: monthly, 6M: every 6 months
7.3.
Maintenance instructions
1. Cleaning
When cleaning the machine, do not direct the jet onto bearings and seals, otherwise the
grease will be washed out and the lifespan of the product will be shortened.
The environment in which the truck is used, determines the cleaning frequency. It is
recommended to assess the need for cleaning based on the applicable rules in the company.
The pallet truck can be cleaned with warm water and maintenance cleaner (165TA7474).
After cleaning, wipe down the truck and lubricate the moving parts (see point 3 in this
chapter).
TotalSource-TRP0029-TRP0030_MANU_EN_12901925.indd 13
TotalSource-TRP0029-TRP0030_MANU_EN_12901925.indd 13
15/12/2020 16:06
15/12/2020 16:06