20/32
7. MAINTENANCE
7.1.
Safety instructions for the repair of the product
• No modifications or alterations which could affect capacity, stability or safety
requirements of the pallet truck, but not limited to these examples, shall be made
without the prior written approval of the original manufacturer, its authorised
representative, or a successor thereof.
• Make sure that the truck is in a secured and stable position, ensuring that it will not
suddenly move.
• Before servicing the scissor pallet truck, remove the load and lower the forks to
their lowest position
• The operator should wear safety shoes and gloves when using or maintaining the
pallet truck.
7.2.
Maintenance schedule
Task
D
W
M
6M
1. Cleaning
2. Daily maintenance check
3. Lubrication
4. Check oil level
D: daily, W: weekly, M: monthly, 6M: every 6 months
7.3.
Maintenance instructions
1. Cleaning
When cleaning the machine, do not direct the jet onto bearings and seals, otherwise the
grease will be washed out and the lifespan of the product will be shortened.
The environment in which the truck is used, determines the cleaning frequency. It is
recommended to assess the need for cleaning based on the applicable rules in the company.
The pallet truck can be cleaned with warm water and maintenance cleaner
(REF 165TA7474). After cleaning, wipe down the truck and lubricate the moving parts
(see point 3 in this chapter).
Summary of Contents for TRSM0004
Page 28: ...28 32 NEUTRAL LOWERING LIFTING 10 2 Hydraulic diagram...
Page 31: ...31 32 NOTES...