22/32
Oil and grease
Reference
Lubricating grease
107TA8448
Multipurpose grease
165TA3769
4. Check oil level
Please check the oil level every 6 months. The oil capacity is about 1 - 1,3 l.. Top up the
fluid level in the rubber reservoir to 5 mm below the top; this must be done with the forks
in the lowered position. Use the correct type of hydraulic oil according to the temperature
conditions below.
Type oil
Reference
Hydraulic oil ISO VG32
141TA2734
Oil change
Changing the oil can only be done by a qualified service technician and according to
the manufacturer’s instructions.
Draining the oil:
1. Lower the forks to the bottom position.
2. Remove the screw and turn the scissor pallet truck on its side.
3. The oil now drains out of the hole (collect the waste oil in an oil
receptacle).
Filling up the oil:
1. Remove the screw of the reservoir.
2. Pour the oil in the hole, the oil level must be at the same level as the
filler hole.
3. Insert the screw into the hole of the reservoir.
4. Bleed the air from the pump unit.
Bleed the air from the pump unit:
1. Set the handle in the LOWER position
2. Move the handle up and down several times
Summary of Contents for TRSM0004
Page 28: ...28 32 NEUTRAL LOWERING LIFTING 10 2 Hydraulic diagram...
Page 31: ...31 32 NOTES...
