11
•
To stop the inflator at any time, turn the low and high pressure switch to the off
“0” position.
•
Remove the hose and store it in the storage area on the back of the product (Fig.
18).
Note: The pressure reading on the gauge while inflating is a measure of the fluctuating pressure
between the item and the high pressure hose. To get an accurate reading, stop inflating and read
the air pressure.
Inflate with the low pressure hose
Note: A pinch valve adapter is included as part of the small inflatable nozzle assembly that
connects to the end of the low pressure hose. The pinch valve adapter is used for items that have
a smaller air opening or pinch valve.
•
Insert the pinch valve adapter into the pinch valve, making sure the tip of the
adapter inserts past the internal “flap” inside the valve. When inflating, make sure
the tip does not get blocked during inflation.
•
Align the slots in the hose with the pins on the side of the inflator. Then turn the
hose counterclockwise as far as it will go (Fig. 19).
•
Press the low pressure switch (II) to start inflating (Fig.10). When the desired
pressure is reached, turn off the switch (Fig. 11).
Summary of Contents for TACLI2002
Page 1: ...1 v BATTERY AIR COMPRESSOR EN...
Page 15: ...15 Exploded view...