13
Accessories
The supplied accessories perform a variety of functions:
•
Conical adapter
can be used on smaller pinch valves to inflate items such as
floats and children's toys, which typically require the user to inflate them by
blowing air into them.
•
The sports ball needle
it can be used to inflate any type of sports ball or any
other item that requires a sports ball inflator needle.
•
Valve adapter Presta
can be used for Presta valve stems.
Maintenance
Attention
When performing maintenance, use only original spare parts. The use of any other non-
genuine spare parts may create a hazard or cause damage to the product.
Always wear eye protection with side shields marked to comply with regulations. Failure
to do so could throw objects into your eyes and cause possible serious injury.
Maintenance
•
Always remove the battery pack from your tool when assembling parts, making
adjustments, cleaning, or when not in use.
•
This power tool does not require intensive maintenance like other types of tools;
however, the ventilation slots in the motor housing must be kept clean. If the unit
becomes defective, the repair must be carried out by an official dealer.
•
Make sure your battery is always securely attached.
•
Keep the battery clean and dry. Keep the charger in a dry room. Remove any
traces of corrosion from the charging terminals.
•
Avoid the use of solvents when cleaning plastic parts.
•
Most plastics are susceptible to damage from various types of commercial
solvents and can be damaged by their use. Use clean cloths to remove dirt, dust,
oil, grease, etc.
•
Never allow any liquid to enter the inflator. Never immerse any part of the inflator
in liquid.
•
Always store your inflator in a dry place.
Warning
Do not at any time allow brake fluids, gasoline, petroleum-based products, penetrating
oils, etc., to come into contact with plastic parts. Chemicals can damage, weaken, or
destroy plastic, which can result in serious personal injury and property damage.
Storage
Hose and cable storage
When the inflator is not in use:
•
The high pressure hose stores in the storage area on the back of the inflator (Fig.
18).
•
The low pressure hose is stored in the storage area on top of the inflator (Fig.
20).
•
The 12V cord stores in the storage area on the bottom of the inflator (Fig. 22).
Summary of Contents for TACLI2002
Page 1: ...1 v BATTERY AIR COMPRESSOR EN...
Page 15: ...15 Exploded view...
