compressor will be frayed and the axle head will be destroyed
.I
f too high it may cause
the lube to spray and the loan of the compressor to increase.
Highest level
Fig.1
Lowest level
b.The ideallube for the compressor should bein a general wayhigh grade with
antiovidant in not easy to become thick because
RI
oxygenat
LQJ
not easy to froth with
lit
t1
e carbon left and high ignition poin
t.
Usually the 13#air compressor o
i1
is usd.the
19#air compressor o
i1
is used in winte
r.
Notes before operating
a.Plug in the power plug to the matched ou
t1
e
t.
b.Check the tightress of the belt
and see if ue
can remove
pulley eas
i1
y by hand.
c.Do use the air switch (Figure 2)to start or stop the compressor
according to the
button position marked on the shell of air switch
IR
r the compressed air in the pipeline
w
i11
exhaust automatically when the air switch break
and
then the compressor could
be started with lit
t1
e burden next time
prevent the motor from damage.
F
. Safety Valve
The air-compressor is equipped with safety valve as the protective device
to prevent from excessive pressure in the gas tank. The safety valve has
already been adjusted according to the designing standard of "Pressure
Containers". Please don't adjust it at discretion
Please advise the maintenance
services of our company or distributors to do for you
if adjustment is necessary.
To assure that the function of the safety valve is in normal state
3
lease drag
the gas release ring at least once a week (Figure 3).
Fig.2
Fig.3
4